| 3537 |
10.1016/j.autcon.2018.04.004 |
Productivity Of Digital Fabrication In Construction:
Cost And Time Analysis Of A Robotically Built Wall |
Garcia De Soto, Borja, 0000-0002-9613-8105;
Agusti-Juan, Isolda; Hunhevicz, Jens; Joss, Samuel; Graser, Konrad;
Habert, Guillaume, 0000-0003-3533-7896; Adey, Bryan T. |
Automation In Construction |
2018 |
| 3540 |
10.1016/j.autcon.2019.01.013 |
Printability, Accuracy And Strength Of Geopolymer Made
Using Powder-Based 3D Printing For Construction Applications |
Xia, Ming; Nematollahi, Behzad; Sanjayan, Jay |
Automation In Construction |
2019 |
| 3545 |
10.1016/j.autcon.2019.102904 |
3D Concrete Printing: A Lower Bound Analytical Model
For Buildability Performance Quantification |
Kruger, Jacques; Zeranka, Stephan; Van Zijl,
Gideon |
Automation In Construction |
2019 |
| 3547 |
10.1016/j.autcon.2019.102933 |
Large-Scale Digital Concrete Construction
<U+2013> Conprint3D Concept For On-Site, Monolithic
3D-Printing |
Mechtcherine, Viktor; Nerella, Venkatesh Naidu; Will,
Frank; Nather, Mathias; Otto, Jens; Krause, Martin |
Automation In Construction |
2019 |
| 3548 |
10.1016/j.autcon.2019.102992 |
Mesh Reinforcing Method For 3D Concrete Printing |
Marchment, Taylor; Sanjayan, Jay |
Automation In Construction |
2020 |
| 4514 |
10.1016/j.cemconcomp.2018.09.015 |
Inline Quantification Of Extrudability Of Cementitious
Materials For Digital Construction |
Nerella, V.N., 0000-0002-8580-5320; Nather, M.; Iqbal,
A.; Butler, M.; Mechtcherine, V. |
Cement And Concrete Composites |
2019 |
| 4515 |
10.1016/j.cemconcomp.2018.10.002 |
Investigation Of The Rheology And Strength Of
Geopolymer Mixtures For Extrusion-Based 3D Printing |
Panda, Biranchi; Unluer, Cise; Tan, Ming Jen,
0000-0002-3583-1723 |
Cement And Concrete Composites |
2018 |
| 4516 |
10.1016/j.cemconcomp.2018.12.014 |
3D Printable Concrete: Mixture Design And Test
Methods |
Rahul, A.V., 0000-0002-5849-2293; Santhanam, Manu;
Meena, Hitesh; Ghani, Zimam |
Cement And Concrete Composites |
2019 |
| 4518 |
10.1016/j.cemconcomp.2019.103344 |
Triaxial Compression Testing On Early Age Concrete For
Numerical Analysis Of 3D Concrete Printing |
Wolfs, R.J.M.; Bos, F.P.; Salet, T.A.M. |
Cement And Concrete Composites |
2019 |
| 4521 |
10.1016/j.cemconres.2018.04.005 |
Rheological Requirements For Printable Concretes |
Roussel, Nicolas, 0000-0003-3457-9826 |
Cement And Concrete Research |
2018 |
| 4522 |
10.1016/j.cemconres.2018.05.006 |
3D Printing Using Concrete Extrusion: A Roadmap For
Research |
Buswell, R.A., 0000-0003-0613-9516; Leal De Silva,
W.R., 0000-0001-9895-5128; Jones, S.Z., 0000-0003-2415-1957;
Dirrenberger, J., 0000-0002-3964-305X |
Cement And Concrete Research |
2018 |
| 4523 |
10.1016/j.cemconres.2018.05.011 |
The Role Of Early Age Structural Build-Up In Digital
Fabrication With Concrete |
Reiter, Lex; Wangler, Timothy; Roussel, Nicolas; Flatt,
Robert J., 0000-0002-5609-8487 |
Cement And Concrete Research |
2018 |
| 4524 |
10.1016/j.cemconres.2018.05.014 |
Hydration And Rheology Control Of Concrete For Digital
Fabrication: Potential Admixtures And Cement Chemistry |
Marchon, Delphine; Kawashima, Shiho; Bessaies-Bey,
Hela; Mantellato, Sara; Ng, Serina |
Cement And Concrete Research |
2018 |
| 4525 |
10.1016/j.cemconres.2018.05.018 |
Particle-Bed 3D Printing In Concrete Construction
<U+2013> Possibilities And Challenges |
Lowke, Dirk, 0000-0001-8626-918X; Dini, Enrico,
0000-0002-6323-3368; Perrot, Arnaud, 0000-0002-7105-4212; Weger, Daniel;
Gehlen, Christoph, 0000-0002-1214-3960; Dillenburger, Benjamin |
Cement And Concrete Research |
2018 |
| 4526 |
10.1016/j.cemconres.2018.05.020 |
Rethinking Reinforcement For Digital Fabrication With
Concrete |
Asprone, Domenico; Menna, Costantino; Bos, Freek P.;
Salet, Theo A.M.; Mata-Falcon, Jaime; Kaufmann, Walter |
Cement And Concrete Research |
2018 |
| 4527 |
10.1016/j.cemconres.2018.06.001 |
|
De Schutter, Geert, 0000-0001-5603-2616; Lesage, Karel;
Mechtcherine, Viktor; Nerella, Venkatesh Naidu, 0000-0002-8580-5320;
Habert, Guillaume, 0000-0003-3533-7896; Agusti-Juan, Isolda |
Cement And Concrete Research |
2018 |
| 4528 |
10.1016/j.cemconres.2019.02.017 |
Hardened Properties Of 3D Printed Concrete: The
Influence Of Process Parameters On Interlayer Adhesion |
Wolfs, R.J.M.; Bos, F.P.; Salet, T.A.M. |
Cement And Concrete Research |
2019 |
| 4530 |
10.1016/j.cemconres.2019.105780 |
Digital Concrete: A Review |
Wangler, Timothy; Roussel, Nicolas; Bos, Freek P.;
Salet, Theo A.M.; Flatt, Robert J. |
Cement And Concrete Research |
2019 |
| 4531 |
10.1016/j.cemconres.2020.106037 |
Extrusion-Based Additive Manufacturing With
Cement-Based Materials <U+2013> Production Steps, Processes, And
Their Underlying Physics: A Review |
Mechtcherine, V.; Bos, F.P.; Perrot, A.; Da Silva, W.R.
Leal; Nerella, V.N.; Fataei, S.; Wolfs, R.J.M.; Sonebi, M.; Roussel,
N. |
Cement And Concrete Research |
2020 |
| 4533 |
10.1016/j.ceramint.2018.03.031 |
Experimental Study On Mix Proportion And Fresh
Properties Of Fly Ash Based Geopolymer For 3D Concrete Printing |
Panda, Biranchi; Tan, Ming Jen |
Ceramics International |
2018 |
| 5055 |
10.1016/j.compositesa.2019.105533 |
A Review Of The Current Progress And Application Of 3D
Printed Concrete |
Zhang, Jingchuan; Wang, Jialiang; Dong, Sufen; Yu, Xun;
Han, Baoguo, 0000-0002-7081-3221 |
Composites Part A: Applied Science And
Manufacturing |
2019 |
| 5080 |
10.1016/j.compositesb.2018.11.109 |
Improving The 3D Printability Of High Volume Fly Ash
Mixtures Via The Use Of Nano Attapulgite Clay |
Panda, Biranchi; Ruan, Shaoqin; Unluer, Cise; Tan, Ming
Jen, 0000-0002-3583-1723 |
Composites Part B: Engineering |
2019 |
| 5096 |
10.1016/j.compositesb.2019.02.040 |
Mechanical Properties And Deformation Behaviour Of
Early Age Concrete In The Context Of Digital Construction |
Panda, Biranchi; Lim, Jian Hui; Tan, Ming Jen,
0000-0002-3583-1723 |
Composites Part B: Engineering |
2019 |
| 5113 |
10.1016/j.compositesb.2019.106968 |
Printability Region For 3D Concrete Printing Using
Slump And Slump Flow Test |
Tay, Yi Wei Daniel; Qian, Ye; Tan, Ming Jen |
Composites Part B: Engineering |
2019 |
| 5123 |
10.1016/j.compositesb.2019.107290 |
Extrusion And Rheology Characterization Of Geopolymer
Nanocomposites Used In 3D Printing |
Panda, Biranchi; Unluer, Cise; Tan, Ming Jen |
Composites Part B: Engineering |
2019 |
| 5190 |
10.1016/j.conbuildmat.2018.12.061 |
Rheological And Harden Properties Of The
High-Thixotropy 3D Printing Concrete |
Zhang, Yu; Zhang, Yunsheng; She, Wei; Yang, Lin; Liu,
Guojian; Yang, Yonggan |
Construction And Building Materials |
2019 |
| 5192 |
10.1016/j.conbuildmat.2019.01.008 |
Mechanical Anisotropy Of Aligned Fiber Reinforced
Composite For Extrusion-Based 3D Printing |
Ma, Guowei; Li, Zhijian; Wang, Li, 0000-0003-1286-4407;
Wang, Fang; Sanjayan, Jay |
Construction And Building Materials |
2019 |
| 5193 |
10.1016/j.conbuildmat.2019.01.235 |
Effects Of Layer-Interface Properties On Mechanical
Performance Of Concrete Elements Produced By Extrusion-Based
3D-Printing |
Nerella, Venkatesh Naidu, 0000-0002-8580-5320; Hempel,
Simone; Mechtcherine, Viktor, 0000-0002-4685-7064 |
Construction And Building Materials |
2019 |
| 5194 |
10.1016/j.conbuildmat.2019.02.144 |
A Systematical Review Of 3D Printable Cementitious
Materials |
Lu, Bing; Weng, Yiwei; Li, Mingyang,
0000-0001-5637-1415; Qian, Ye; Leong, Kah Fai; Tan, Ming Jen; Qian,
Shunzhi, 0000-0002-3583-1723 |
Construction And Building Materials |
2019 |
| 5199 |
10.1016/j.conbuildmat.2019.07.078 |
An Ab Initio Approach For Thixotropy Characterisation
Of (Nanoparticle-Infused) 3D Printable Concrete |
Kruger, Jacques, 0000-0003-0090-423X; Zeranka, Stephan;
Van Zijl, Gideon, 0000-0001-8066-7750 |
Construction And Building Materials |
2019 |
| 7138 |
10.1016/j.jclepro.2019.02.185 |
Synthesis And Characterization Of One-Part Geopolymers
For Extrusion Based 3D Concrete Printing |
Panda, Biranchi; Singh, Gvp Bhagath; Unluer, Cise; Tan,
Ming Jen |
Journal Of Cleaner Production |
2019 |
| 7571 |
10.1016/j.jmatprotec.2019.04.007 |
Effect Of Printing Parameters In 3D Concrete Printing:
Printing Region And Support Structures |
Tay, Yi Wei Daniel, 0000-0002-7369-2138; Li, Ming Yang;
Tan, Ming Jen, 0000-0002-3583-1723 |
Journal Of Materials Processing Technology |
2019 |
| 8049 |
10.1016/j.matdes.2019.107634 |
Insights Into Material Design, Extrusion Rheology, And
Properties Of 3D-Printable Alkali-Activated Fly Ash-Based Binders |
Alghamdi, Hussam; Nair, Sooraj A.O.; Neithalath,
Narayanan, 0000-0002-3174-0402 |
Materials & Design |
2019 |
| 8050 |
10.1016/j.matdes.2019.107651 |
An Approach To Develop Printable Strain Hardening
Cementitious Composites |
Chaves Figueiredo, Stefan; Romero Rodriguez, Claudia;
Ahmed, Zeeshan Y.; Bos, D.H.; Xu, Yading, 0000-0001-5825-4175; Salet,
Theo M.; Copuro<U+011F>lu, O<U+011F>uzhan; Schlangen, Erik;
Bos, Freek P. |
Materials & Design |
2019 |
| 8051 |
10.1016/j.matdes.2019.107684 |
Method Of Enhancing Interlayer Bond Strength In
Construction Scale 3D Printing With Mortar By Effective Bond Area
Amplification |
Marchment, Taylor; Sanjayan, Jay; Xia, Ming,
0000-0001-5502-6548 |
Materials & Design |
2019 |
| 8052 |
10.1016/j.matdes.2019.108088 |
Development Of 3D Printable Engineered Cementitious
Composites With Ultra-High Tensile Ductility For Digital
Construction |
Zhu, Binrong; Pan, Jinlong, 0000-0002-2838-4849;
Nematollahi, Behzad, 0000-0003-2422-4589; Zhou, Zhenxin; Zhang, Yang;
Sanjayan, Jay |
Materials & Design |
2019 |
| 8063 |
10.1016/j.matlet.2018.09.159 |
Micro-Cable Reinforced Geopolymer Composite For
Extrusion-Based 3D Printing |
Ma, Guowei; Li, Zhijian; Wang, Li, 0000-0003-1286-4407;
Bai, Gang |
Materials Letters |
2019 |
| 8064 |
10.1016/j.matlet.2018.11.131 |
Rheological Behavior Of High Volume Fly Ash Mixtures
Containing Micro Silica For Digital Construction Application |
Panda, Biranchi; Tan, Ming Jen |
Materials Letters |
2019 |
| 21196 |
10.3390/ma11122352 |
Effect Of Polypropylene Fibre Addition On Properties Of
Geopolymers Made By 3D Printing For Digital Construction |
Nematollahi, Behzad; Vijay, Praful; Sanjayan, Jay;
Nazari, Ali; Xia, Ming; Naidu Nerella, Venkatesh, 0000-0002-8580-5320;
Mechtcherine, Viktor |
Materials |
2018 |
| 21198 |
10.3390/ma12132149 |
The Effect Of Material Fresh Properties And Process
Parameters On Buildability And Interlayer Adhesion Of 3D Printed
Concrete |
Panda, Biranchi; Noor Mohamed, Nisar Ahamed; Paul,
Suvash Chandra; Bhagath Singh, Gvp; Tan, Ming Jen; <U+0160>avija,
Branko, 0000-0003-1299-1449 |
Materials |
2019 |